A Wonderful Shinto 'Shishi' Katana With All Original Edo Period Koshirae of Exemplary Museum Grade Fittings based on The Mythical Protectors of The Shinto Shrines, the Shishi Lion-Dogs

A typical example of a very fine katana of a seieibushi (elite samurai) traditionally the Highest rank of elite samurai. Circa 1670, with a most fine hon-zukuri blade form with suguha hamon, mumei; and a wonderful iron sumiiri kakugata tsuba with shishiaibori decoration of a shishi lion dog below a waterfall, with complimentary matching mino-goto fuchi, fabulous large shishi lion-dog menuki in shakudo with pure gold inlay highlights; set within its original beautiful Edo period saya of a combination of ribbed and lobster-scale urishi lacquer. The fuchi is Goto school of deep takebori of gold and shakudo catydids and insects, with a carved polished buffalo horn kashira. Tradition black tsuka Ito wrapped over the fabulous menuki on the samegawa {giant rayskin}

Shishi (or Jishi) is translated as "lion” but it can also refer to a deer or dog with magical properties and the power to repel evil spirits. A pair of shishi traditionally stand guard outside the gates of Japanese Shinto shrines and Buddhist temples, although temples are more often guarded by two Nio Protectors. The Shishi (like the Nio) are traditionally depicted in pairs, one with mouth open and one with mouth shut. The opened/closed mouth relates to Ah (open mouth) and Un (closed mouth). “Ah" is the first sound in the Japanese alphabet, while "N" (pronounced "un") is the last. These two sounds symbolize beginning and end, birth and death, and all possible outcomes (from alpha to omega) in the cosmic dance of existence. The first letter in Sanskrit is "Ah" as well, but the last is "Ha." Nonetheless, the first and last sounds produced by the mouth are "Ah" and "M." The Sanskrit "m" and the Japanese "n" sound exactly the same when hummed with mouth closed. The spiritual Sanskrit terms AHAM and AUM thus encapsulate the first letter-sound (mouth open) and the final sound (mouth closed). Others say the open mouth is to scare off demons, and the closed mouth to shelter and keep in the good spirits. The circular object often shown beneath their feet is the Tama 玉, or sacred Buddhist jewel, a symbol of Buddhist wisdom that brings light to darkness and holds the power to grant wishes.
The Incredible Story of Japanese Lacquer on Samurai Swords Scabbards, called Saya

Japanese lacquer, or urushi, is a transformative and highly prized material that has been refined for over 7000 years.
Cherished for its infinite versatility, urushi is a distinctive art form that has spread across all facets of Japanese culture from the tea ceremony to the saya scabbards of samurai swords
Japanese artists created their own style and perfected the art of decorated lacquerware during the 8th century. Japanese lacquer skills reached its peak as early as the twelfth century, at the end of the Heian period (794-1185). This skill was passed on from father to son and from master to apprentice.

Some provinces of Japan were famous for their contribution to this art: the province of Edo (later Tokyo), for example, produced the most beautiful lacquered pieces from the 17th to the 18th centuries. Lords and shoguns privately employed lacquerers to produce ceremonial and decorative objects for their homes and palaces.
The varnish used in Japanese lacquer is made from the sap of the urushi tree, also known as the lacquer tree or the Japanese varnish tree (Rhus vernacifera), which mainly grows in Japan and China, as well as Southeast Asia. Japanese lacquer, 漆 urushi, is made from the sap of the lacquer tree. The tree must be tapped carefully, as in its raw form the liquid is poisonous to the touch, and even breathing in the fumes can be dangerous. But people in Japan have been working with this material for many millennia, so there has been time to refine the technique!
Flowing from incisions made in the bark, the sap, or raw lacquer is a viscous greyish-white juice. The harvesting of the resin can only be done in very small quantities.
Three to five years after being harvested, the resin is treated to make an extremely resistant, honey-textured lacquer. After filtering, homogenization and dehydration, the sap becomes transparent and can be tinted in black, red, yellow, green or brown.
Once applied on an object, lacquer is dried under very precise conditions: a temperature between 25 and 30°C and a humidity level between 75 and 80%. Its harvesting and highly technical processing make urushi an expensive raw material applied in exceptionally fine successive layers, on objects such as bowls or boxes.After heating and filtering, urushi can be applied directly to a solid, usually wooden, base. Pure urushi dries into a transparent film, while the more familiar black and red colours are created by adding minerals to the material. Each layer is left to dry and polished before the next layer is added. This process can be very time-consuming and labor-intensive, which contributes to the desirability, and high costs, of traditionally made lacquer goods. The skills and techniques of Japanese lacquer have been passed down through the generations for many centuries. For four hundred years, the master artisans of Zohiko’s Kyoto workshop have provided refined lacquer articles for the imperial household

Blade 28.5 inches long from tsuba to tip. Overall 40.5 inches long in saya.

As once told to us by an esteemed regular visitor to us here in our gallery, and the same words that are repeated in his book;

“In these textures lies an extraordinary and unique feature of the sword - the steel itself possesses an intrinsic beauty. The Japanese sword has been appreciated as an art object since its perfection some time during the tenth century AD. Fine swords have been more highly prized than lands or riches, those of superior quality being handed down from generation to generation. In fact, many well-documented swords, whose blades are signed by their makers, survive from nearly a thousand years ago. Recognizable features of the blades of hundreds of schools of sword-making have been punctiliously recorded, and the study of the sword is a guide to the flow of Japanese history.”
Victor Harris
Curator, Assistant Keeper and then Keeper (1998-2003) of the Department of Japanese Antiquities at the British Museum. He studied from 1968-71 under Sato Kenzan, Tokyo National Museum and Society for the Preservation of Japanese Swords

Every single item from The Lanes Armoury is accompanied by our unique Certificate of Authenticity. Part of our continued dedication to maintain the standards forged by us over the past 100 years of our family’s trading  read more

Code: 25304

A Very Fine Indeed Samurai Shinto Wakizashi with Original Edo Goto School Dragon Fittings of Shakudo and Gold & An Edo Tettsu Krishitan {Christian} Tsuba

With Goto school pure gold and shakudo fushi kashira decorated with dragons, on a hand punched nanako ground. A most interesting and beautiful quality o-sukashi Krishitan tsuba of a squared-off mokko form cross, decorated with flowing river water and inlaid gold dots representing stars. The Stars and The River as Christian Symbols, are images or symbolic representation with sacred significance. The meanings, origins and ancient traditions surrounding Christian symbols date back to early times when the majority of ordinary people were not able to read or write and printing was unknown. Many were 'borrowed' or drawn from early pre-Christian traditions. It may be that the design of the tsuba confronted the believer to the ambiguity born of a prolonged time of painful secrecy. Surrounded by the threat of violence, even a weapon could bear a hidden symbol of Christianity—the cross.

The Hidden Christians quieted their public expressions and practices of faith in the hope of survival from the great purge. They also suffered unspeakably if captured and failed to renounce their Christian belief.
It also has its optional kodzuka, the hilt decorated with a dragon, and the blade that is signed and with a hamon. Superb original Edo period lacquered saya with a stripe and counter stripe pattern design. Three hole nakago and superb polished Edo blade of a gently undulating notare hamon displaying super grain in the hada. Wakizashi have been in use as far back as the 15th or 16th century. The wakizashi was used as a backup or auxiliary sword; it was also used for close quarters fighting, and also to behead a defeated opponent and sometimes to commit ritual suicide. The wakizashi was one of several short swords available for use by samurai including the yoroi toshi, the chisa-katana and the tanto. The term wakizashi did not originally specify swords of any official blade length and was an abbreviation of "wakizashi no katana" ("sword thrust at one's side"); the term was applied to companion swords of all sizes. It was not until the Edo period in 1638 when the rulers of Japan tried to regulate the types of swords and the social groups which were allowed to wear them that the lengths of katana and wakizashi were officially set.

Kanzan Sato, in his book titled "The Japanese Sword", notes that the wakizashi may have become more popular than the tanto due to the wakizashi being more suited for indoor fighting. He mentions the custom of leaving the katana at the door of a castle or palace when entering while continuing to wear the wakizashi inside. Wakizashi were worn on the left side, secured to the obi waist sash. Although they appear to be likely a relative expensive luxury compared to other antique swords from other nations, they are in fact incredible value for money, for example a newly made bespoke samurai style sword blade from Japan will cost, today, in excess of £11,000, take up to two years to complete, will come with no fittings at all, and will be modern naturally with no historical context or connection to the ancient samurai past in any way at all. Our fabulous original swords can be many, many, hundreds of years old, stunningly mounted as fabulous quality works of art, and may have been owned and used by up to 30 samurai in their working lifetime. Plus, due to their status in Japanese society, look almost as good today as the did possibly up to 400 years ago, or even more. Every katana, tachi, or wakazashi buyer will receive A complimentary sword stand, plus a silk bag, white handling gloves and a white cleaning cloth. .  read more

Code: 23913

A Wonderful, Original, Antique Victorian Helmet of the 2nd Dragoon Guards {The Queen's Bays}

Superb condition with gilt finish skull and decor, all original lining present and chin chain. One of the best surviving examples one can see in our out of a museum

Following a long period of policing and garrison duties at home, the unit next deployed to India after the outbreak of mutiny there in 1857. It went on to help capture Lucknow in 1858.

It then spent most of the remainder of the 19th century garrisoning India or on home service. It also deployed to the Boer War (1899-1902) in 1901, taking part in the anti-guerrilla operations there, and sustaining heavy losses at Leeuwkop in 1902.

The outbreak of the First World War (1914-18) saw it deploy to the Western Front with the 1st Cavalry Division. It fought in both a mounted and infantry role in many engagements, including the Retreat from Mons, (1914), Le Cateau (1914), the Marne (1914), Ypres (1914), the Somme (1916), Arras (1917), Cambrai (1917) and the Scarpe (1918).

How Major George Harold Absell Ing, Of The 2nd Dragoon Guards (Queen's Bays), Won The D.S.O. At The Second Battle Of Ypres

On the evening of Wednesday, May 12th 1915, the 28th Division which held that part of our line from a point northeast of Verlorenhoek to the Bellewaarde Lake, and which had been fighting continuously since April 22nd, went into reserve, its place being taken by the 1st and 3rd Cavalry Divisions, under general de Lisle. It was a difficult line to defend, since there were no natural advantages and our trenches were to a large extent recently improvised. This cavalry were very speedily to discover to their cost, for early on the following morning a terrific bombardment began against their front, shells of every description raining down in a continuous stream. The brunt of the bombardment fell on the 3rd Division, and the 3rd Dragoon Guards, I the 6th brigade, were almost buried alive beneath the debris of their parapet. But farther north, where the 2nd Dragoon Guards were posted, close to the Ypres-Zonnebeke road, the shelling was also very heavy, and about 8 a.m. part of the regiment on their right began to retire, their trenches having been rendered untenable. The retirement might easily have become a general one, had not a brave officer of the Queen?s Bays, Major Ing, at great personal risk, saved the situation. Leaving his own trench, he ran out into the open road, standing there, with shells every moment bursting around him, stopped the retirement of some forty men and directed them to take shelter, some in shell holes and others in ditch beside the road on their flank. By this prompt and gallant action, for which he was subsequently awarded the Distinguished Service Order, Major Ing rendered a most invaluable service. Major Ing entered the 2nd Dragoon Guards in September 1900, and served in the South African War, in which he was slightly wounded, and for which he received the Queen?s Medal with five clasps. He was promoted captain in February 1914, and attained his present rank in August 1911. He is thirty-five years of age, and his home is at Crockham Hill, Kent. Extracted from 'Deeds That Thrill The Empire'

The regiment was renamed the Queen's Bays (2nd Dragoon Guards) in 1921 and spent the inter-war period in Egypt, India and England, where it mechanised with light tanks in 1937. Two years later, it joined the Royal Armoured Corps.

It fought in northern France in May and June 1940, before evacuating from Brest. By November 1941, it had recovered and re-equipped, deploying to North Africa and fighting at Gazala and the First and Second Battles of Alamein in 1942. At one point in the campaign, it remained in action continuously for a record 19 days - longer than any other armoured regiment in that theatre.

After taking part in the Tunisian campaign in 1943, it moved to Italy in May 1944, fighting in several engagements including the Battle of Argenta Gap (1945).  read more

Code: 25327

A Most Beautiful, Original, Victorian, Merryweather British Fire Service Helmet, In Brass With Gilt Dragon Comb

An original British Victorian fire service helmet, with signs of service use, naturally, and with denting on the crest and skull as usual, but it is simply part of its character, to demonstrate this is not a piece that never saw service but was used as it should, but cared for, and beautifully preserved for posterity.

The traditional two-piece skull has the embossed raised dragon comb, rose bosses, crossed axe and hoses helmet plate, and original leather liner around 75% complete. Overall in every way average condition for age.

The desirable standard pattern of Fire Service helmet used by all British county and city Fire Services in the Victorian era and just past WW1.

The earliest fire brigade was Roman and that is the first fire brigade of which we have any substantial history was created by Marcus Licinius Crassus. Marcus Licinius Crassus was born into a wealthy Roman family around the year 115 BC, and acquired an enormous fortune through (in the words of Plutarch) "fire and rapine." One of his most lucrative schemes took advantage of the fact that Rome had no fire department. Crassus filled this void by creating his own brigade?500 men strong?which rushed to burning buildings at the first cry of alarm. Upon arriving at the scene, however, the fire fighters did nothing while their employer bargained over the price of their services with the distressed property owner. If Crassus could not negotiate a satisfactory price, his men simply let the structure burn to the ground, after which he offered to purchase it for a fraction of its value. Emperor Nero took the basic idea from Crassus and then built on it to form the Vigiles in AD 60 to combat fires using bucket brigades and pumps, as well as poles, hooks and even ballistae to tear down buildings in advance of the flames. The Vigiles patrolled the streets of Rome to watch for fires and served as a police force. The later brigades consisted of hundreds of men, all ready for action. When there was a fire, the men would line up to the nearest water source and pass buckets hand in hand to the fire.

Rome suffered a number of serious fires, most notably the fire on 19 July AD 64 and eventually destroyed two thirds of Rome.
In the UK, the Great Fire of London in 1666 set in motion changes which laid the foundations for organised firefighting in the future. In the wake of the Great Fire, the City Council established the first fire insurance company, "The Fire Office", in 1667, which employed small teams of Thames watermen as firefighters and provided them with uniforms and arm badges showing the company to which they belonged.
However, the first organised municipal fire brigade in the world was established in Edinburgh, Scotland, when the Edinburgh Fire Engine Establishment was formed in 1824, led by James Braidwood. London followed in 1832 with the London Fire Engine Establishment. No chinscale, some small split perishing on the skull above top right of the badge, see photo two in the gallery.  read more

Code: 25332

A Stunning Japanese 0-Tanto Signed Echizen Kuni ju nin Kanenori Circa 1615

A very large Japanese samurai dagger around 400 years old possibly Keicho era. Beautifully mounted in its all original Edo period fittings of very fine quality. The takebori tsuba is decorated with a most finely executed dragon with pure gold highlights, and bears a large cursive signature by its maker. The fushigashira are iron inlaid with pure silver wire decoration of tendrils and flowers. The menuki are absolutely delightful of pure gold decorated twin pairs of cockerals in differing poses. The wide and long blade is most imposing, with a very unusual carved hi groove configuration. The original Edo urushi ishime lacquer saya has a fine kozuka utility knife fitted in its pocket that has a gold spiny lobster in takebori on very finely defined nanako ground see below for the detail on the nanako work, the rear of the kozuka handle is raindrop engraved with gold overlay

This beautiful large samurai dagger was made in and around the time of the famous clan conflict at Osaka Castle. In 1614, the Toyotomi clan rebuilt Osaka Castle. At the same time, the head of the clan sponsored the rebuilding of Hoko-ji in Kyoto. These temple renovations included the casting of a great bronze bell, with inscriptions that read "May the state be peaceful and prosperous" (kokka anko), and "May noble lord and servants be rich and cheerful" (kunshin horaku). The shogunate interpreted "kokka anko" as shattering Ieyasu's the Shogun name to curse him, and also interpreted "kunshin horaku" to mean "Toyotomi's force will rise again," which meant treachery against the new Tokugawa shogunate. Tensions began to grow between the Tokugawa and the Toyotomi clans, and only increased when Toyotomi began to gather a force of ronin mercenary samurai who had lost their lord and enemies of the shogunate in Osaka. Ieyasu, despite having passed the title of Shogun to his son in 1605, nevertheless maintained significant influence.

Despite Katagiri Katsumoto's attempts to mediate the situation, Ieyasu found the ideal pretext to take a belligerent attitude against Yodo-dono and Hideyori. The situation worsened for September of that year, when the news reached Edo that in Osaka they were grouping a large quantity of ronin-you are missing without a lord-at the invitation of Hideyori.

Katsumoto proposed to Yodo-dono be sent to Edo as a hostage with the desire to avoid hostilities, to which she flatly refused. Suspect of trying to betray the Toyotomi clan, Yodo-dono finally banished Katsumoto and several other servants accused of treason from Osaka castle, and go to the service of the Tokugawa clan, consequently any possibility of reaching an agreement with the shogunate was dissolved.

This last movement of Yodo-dono, who acted as the guardian of Hideyori, led to the beginning of the siege of Osaka. The siege of Osaka ( Osaka no Eki, or, more commonly, Osaka no Jin) was a series of battles undertaken by the Tokugawa shogunate against the Toyotomi clan, towards the end of the Keicho era, and ending in that clan's destruction. Divided into two stages (winter campaign and summer campaign), and lasting from 1614 to 1615, the siege put an end to the last major armed opposition to the shogunate's establishment. The end of the conflict is sometimes called the Genna Armistice ( Genna Enbu), because the era name was changed from Keicho to Genna immediately following the siege.

Nanako Ji: "fish roe ground" A surface decoration produced by forming very small raised bosses by a sharply struck punch or burin called 'nanako tagane'. Shakudo is the metal most often used, but copper and gold are quite often employed. The harder metals, shibuichi, silver and iron are rarely decorated in this way. The size of the dots vary from 0.04" to 0.008" (25 to 125 and inch) and the regularity of the work is marvelous as the dots must be spaced entirely by touch. The dots are usually arranged in straight lines or in lines parallel to the edge of the piece being decorated, but sometimes in more elaborate patterns. Used on guards since the Momoyama period although the technique existed since much earlier periods. Usually done by specialist 'nanako-shi', but sometimes done by the maker of the guard himself. The articles of sword ornamentation made by the Goto artists were practically all on shakudo grounds with nanako finish; after the emergence of the machibori artisans in the mid-Edo period and the popularity of the newly inspired kozuka, shakudo grounds with nanako finish "became the rage". Nanako finish is probably an evolution and refinement of a very old style finish (which it vaguely resembles); "millet finish", 'awa ishime', which is found on some old armorer tsuba. However, awa ishime consisted of small, round dimples punched into the surface of the ground; on the other hand, nanako is formed by striking the ground with a cup-shaped punch to raise, and project upward from the surface, small semi-hemispheric nipples. Since we find nanako finish on old yamagane grounds, it was in use as early as the Kamakura period. It is note-worthy that a nanako finish on a shakudo ground has been used since the time of the first Goto 1440 - 151 in the mitokoromono, "set of three", for use on formal or ceremonial occasions. Later, shakudo nanako became the regular finish for use by the metal artisans. (deleted repeated sentences) In applying nanako, meticulous and scrupulous care must be used in positioning and striking the "cupping tool" in order to achieve fine, regular, carefully and closely spaced, identical results, row after row. Careless, imprecise and even coarse workmanship can be detected in the nanako of some older works and on "ready made" products, but work of later years, executed with infinite and scrupulous care, are beautiful beyond belief. However, even the finest of execution of nanako finish applied to brass (shinchu) or shibuichi fails to carry the distinct air of refinement and elegance of similar work on shakudo. The very elegance of nanako workmanship reflects not only the extraordinary skills of the Japanese in the execution of minute, detailed work, but also their tremendous patience and artistic inspiration. It is said that blindness of nanako workers at thirty years of age was usual because of the microscopic and meticulous work so carefully and patiently executed. On many old tsuba, pre-dating the period of the Goto, one encounters nanako laid in horizontal or vertical rows; on subsequent work nanako was applied along curved lines conforming to the shape of the tsuba.

22.5 inches long overall, 14 inches long blade tsuba to tip.  read more

Code: 22736

Archaic Zhou Dynasty Bronze Halberd or ‘Ge’ Circa 5th Century BC the Period of the Great Military Doctrine 'The Art of War' by General Sun-Tzu

Another from our collection of stunning ancient Chinese swords and weaponry that we recently acquired, including halbeard axe called a 'Ge'.

This is the very type of original ancient ceremonial halberd, defined by the ancient Chinese as a dagger axe 'Ge' and exactly the type as used by the warriors serving under the world renowned General Sun Tzu, in the Kingdom of Wu, who is thought by many to be the finest general, philosopher and military tactician who ever lived. His 2500 year old book on the methods of warfare, tactics and psychology are still taught and highly revered in practically every officer training college throughout the world.

In excavated condition, cast in one piece, slightly curved terminal blade of flattened-diamond section, pierced along a basal flange with three slots, and a hole with fabulous areas of crystallized malachite, blue/green patina.

We also show in the gallery a painting of how this 'Ge' halbard would have been used once mounted 2500 odd years ago on its long haft, and used by a Zhou warrior, there is also one depicted being carried in a painting that we show in the gallery being used in an infantry charge in the Zhou dynasty.

This is a superb original ancient piece from one of the great eras of Chinese history, it is unsigned but near identical to another that was signed and inscribed with details that have now been fully translated, deciphered and a few years ago shown at Sothebys New York estimated to a sale value of $300,000. Its research details are fully listed below, and it is photographed within our gallery for the viewers comparison. Naturally, our un-inscribed, but still, very rare original version, from the same era and place, is a much more affordable fraction of this price

The signed and named Sotheby's of New York example that we show in the gallery, was formerly made for its original warrior owner, Qu Shutuo of Chu, it is from the same period and in similar condition as ours. We reference it's description below, and it is photographed within the gallery, it is finely cast with the elongated yuan divided by a raised ridge in the middle of each side and extending downward to form the hu, inscribed to one side with eight characters reading Chu Qu Shutuo, Qu X zhisun, all bordered by sharply finished edges, the end pierced with three vertically arranged chuan (apertures), the nei with a further rectangular chuan and decorated with hook motifs, inscribed to one side with seven characters reading Chuwang zhi yuanyou, wang zhong, and the other side with five characters reading yu fou zhi X sheng, the surface patinated to a dark silver tone with light malachite encrustation
An Exhibition of Ancient Chinese Ritual Bronzes. Loaned by C.T. Loo & Co., The Detroit Institute of Arts, Detroit, 1940, pl. XXXIII.
New Orleans Museum of Art, New Orleans, March - June 1948.

This inscribed bronze halberd blade, although typical in form, is uniquely important as its inscription serves as a critical primary source that reveals the name of its original owner: Qu Shutuo of Chu. The only known close counterpart to this blade is a damaged bronze halberd blade, missing the yuan, and inscribed on the hu with seven characters, which can be generally translated to ‘for the auspicious use of Qu Shutuo of Chu’. That halberd is now in the collection of the Hunan Provincial Museum, Hunan, and published in Wu Zhenfeng, Shangzhou qingtongqi mingwen ji tuxiang jicheng Compendium of inscriptions and images of bronzes from Shang and Zhou dynasties, vol. 32, Shanghai, 2012, no. 17048

The remaining thirteen inscriptions can be translated as: 'Qu Shutuo of Chu, Qu X's grandson, yuanyou of the King of Chu'. Based on the inscription, the owner of this blade can be identified as such.

See for reference; The Junkunc Collection: Arts of Ancient China / Sotheby's New York
Lot 111

We also show in the gallery a photo of another similar halberd from a museum exhibition, of a Chinese ancient king bodyguard’s halberd gilt pole mounts for his personal charioteer

This is one of a stunning collection of original archaic bronze age weaponry we have just acquired. Many are near identical to other similar examples held in the Metropolitan in New York, the British royal collection, and such as the Hunan Provincial Museum, Hunan, China. As with all our items, every piece is accompanied by a certificate of authenticity. Approx 9.75 inches across.  read more

Code: 24390

A Simply Fabulous & Incredibly Rare 18th Century Hand Held, Military Grenade & Mortar Launcher 'Cohorn' Pistol, A Huge Cannon Barrelled Blunderbuss

A Fabulous piece, and such a rare cohorn pistol, somewhat with an appearance of an amazing short type of huge cannon barrelled blunderbuss, but designed not to fire swan shot or ball but to launch an explosive grenade or mortar, rare pistol size.

Made in the 1760's, it is a hand portable grenade or mortar launcher sometimes known in its day as a cohorn, named after its inventor, and also known as a pyrotechnic gun. A Coehorn or cohorn) is a lightweight mortar originally designed by Dutch military engineer Menno van Coehoorn. Van Coehoorn demonstrated them in May 1701 to William III of England, and they were first used in action at the siege of Kaiserswerth in 1702

It is such a rarity today as to be a near unique survivor of its type.
We show in the gallery photo 10 another example of a rare hand held mortar / grenade gun, that sold at auction 3 years ago in Germany, for a remarkable 120,000 euros although it was certainly much more elaborate as it was a civilian type.

The two stage barrel is stunning and has traces and of scrolling flames engraved across the top. The butt has a grotesque cast mask, as was popular for fun guns in the early 18th century, and a most finely engraved trigger guard, depicting and ancient helmeted warrior, and an engraved brass side plate.

During its working life in has certainly seen use in the Americas during the 18th and early 19th century, as it has an American lock-makers percussion conversion.

Around four years ago or so we were absolutely delighted to have albeit very briefly a very, very rare, early shoulder mounted grenade launcher, just as was used by the early grenadiers, it was also a hand held version, but larger, yet a pistol sized version such as this, is, in some respects is even rarer still. It has had a percussion conversion lock by R Ashmore an American maker converted by him in the first quarter part of the 19th century. His name is engraved on the lock but worn.

The hand mortar is a firearm that was used in the late 17th century and 18th century to throw fused grenades. The action was similar to a flintlock, matchlock, or wheellock firearm (depending on the date of production), but the barrel was short, usually less than 2 inches (5 cm) to 4 inches (10 cm) long (though some are reported to have barrels up to 13 inches (33 cm) long), and had a large bore to accommodate the grenade; usually between 2 and 2.5 inches (5 to 6 cm). Between 1672 and 1740, the Royal Foundry of Berlin (Knigliches Giehaus zu Berlin) produced 302 hand mortars (Handmorser). Additionally, a mortar at the Museum of Artillery in Woolwich, Great Britain bears the inscription Fondeur Strasbourg (made in Strasbourg (France)) and several other surviving pieces bear the coat of arms of Wurttemberg indicating that they might have been made there. The first references to the type of grenade used in a hand mortar occur in a 1472 work entitled Valturius, where an incendiary prototype may have been produced. However, widespread use of the explosive grenade does not occur until the early-to-mid-16th century under Francis I of France. An early casualty of this type of grenade was Count de Randan who died of shrapnel wounds to the legs from a grenade during the Siege of Rouen (probably the battle of Issoire) in 1562. Explosive grenades were made from brass, glass, and possibly clay, and incendiary projectiles were made from canvas, however, Nathanael Nye, Master Gunner of the City of Worcester in a work entitled Art of Gunnery published in 1647, remarks that the soldiers of his day were not fond of handling the grenades because they were too dangerous. While there are substantial records of infantry units called grenadiers throughout the 18th century in Europe, these units generally threw the grenades by hand, but maybe a few men of the regiment could be armed with launchers such as this. After priming the firearm and adding the gunpowder, the shooter would light a grenade fuse, place the grenade in the muzzle of the mortar, then fire it at the enemy. However, accidents could occur if the weapon misfired and the lit grenade remained in the barrel. Additional modifications attempted to light the grenade using the burning gunpowder, but accounts say that the fuse would be forced into the grenade which would explode immediately.

The low number of surviving specimens of this firearm indicate that it was not a popular weapon, possibly due to the safety issues. In his essay on the weapon, Hewitt opines that the mortar is among a variety of "projects for destruction which have never destroyed anything but the fortunes of their inventors". At least one version of the hand mortar was probably invented by John Tinker in 1681. However, his mortar may have been an improvement on an earlier piece. A reference to this mortar may have appeared in a work entitled Ancient Armour which refers to a tinker's mortar. Another account refers to a hand mortar as a cohorn, and attributes its invention to a Dutch engineer, Menno Van Coehoorn, who lived from 1641 to 1704. Hand Mortars were also to be found in the New World. References to a hand mortar being transferred in Maryland are found in the record of The Proceedings of the Council of Maryland in 1698. Another account in the journal of Alexander Henry the younger tells of a hand mortar (called a cohorn; after Menno van Coehoorn) being loaded with a pound of powder, 30 balls, and fired in an action against Sioux indians in 1808.

Another reference to the use of cohorns in the New World can be found in The Life of Joseph Brant (Thayendanegea) including the Border Wars of the American Revolution by William L. Stone (two volumes) published Albany NY 1865. Stone in describing Sir William Johnson's Niagara campaign of 1759 notes the following: "The youthful warrior likewise accompanied Sir William during the Niagara Campaign of 1759, and in the brilliant achievements of the Baronet, after the chief command had devolved upon him upon the death of General Prideaux, is said to have acquitted himself with distinguished bravery. General Prideaux, commanding the expedition, was killed by the accidental explosion of a cohorn on the 20th of July?" (Stone, Vol 1, p. 20). The action is tight and the forend has old working life stock repairs. 12.5 inches long , barrel 6.75 inches long 1.25 inch bore  read more

Code: 23197

A Large Original Duraluminum Zeppelin Aeronautical Alloy Embossed Bowl

It is on of the largest pieces of it kind we have ever seen, and a stunning example of the earliest forms of aeronautical object d’art.

It is made from Duraluminum, a very expensive and seldom-used white metal alloy, except for the construction of Zeppelins. Incredibly strong yet light, and not vulnerable to dangerous corrosion. The perfect material for the construction of airships in the earliest days of the aeronautics.

Often when a Zeppelin crashed in the early days, the framework was recycled and used to create such amazing pieces, embossed with the symbols of the vessels from which they were made, such as this, and eagerly acquired by the highly patriotic German people.

This bowl measures 9.25" x 11." It sports a likeness of Graf von Zeppelin and an early zeppelin in the sky. We have seen cups and bowls of this nature before, but this is the largest one we have ever seen.  read more

Code: 22682

Most Rare 1920's Artefacts, of Houdini's Great Friend, of Early 20th Century Stage Magicians. The Magician's Club of London, Founded by Harry Houdini, Gold Medal Mounted Badge, & A Magic Circle Gold Medal

Rare and highly interesting items of early Magicians Clubs, and both directly connected to the great and legendary, Harry Houdini. Both finest pure gilt and enamel, and from the 1920's, each with blue water silk ribbon mount. Magician’s Club medal, together with a Member of the Magic Circle medal, in pure gilt and finest blue enamel, of Wilfred Allan, and Houdini's great friend Douglas Dexter's principle pupil. The Magicians' Club of London was formed in 1911 by Harry Houdini along with others including Servais Le Roy, Chris Van Bern, Carl Stakemann, and Stanley Collins.
It was a concept of Will Goldston who had taken umbrage with The Magic Circle (founded in 1905) and decided to start his own society. He wrote an article titled "The League of Magicians - A Suggestion by Will Goldston" in his Magician Annual for 1910-11.
The first meeting was officially reported in Goldston's Magician Monthly.
Houdini was elected president, the rest as Vice-Presidents with Stanley Collins as Secretary and Will Goldston as Treasurer. Nearly a hundred members were enrolled at the inaugural meeting on May 27, 1911. Houdini remained president until his death.

After the death of Houdini in 1926, Will Goldston was unanimously elected to succeed him. He held this office for the next three years, relinquishing it to Louis Gautier in 1929, but continuing to serve as Treasurer

The club seemed to have disbanded some time after Will Goldton passed away in 1948. In Goodliffe's Abracadabra magazine July 1949, inquiries were made regarding the Magicians' Club, London, since the death of Will Goldston asking if it had died a natural death along with its founder. As far as they were able to ascertain, it had. Wilfred Allan was the principle pupil of magician, and dear friend of co member Harry Houdini, Douglas Dexter. Douglas Dexter was once summoned to the Royal Palace for a personal Command Performance for the King, died in 1938 and Wilfred Allan died a year later in 1939.  read more

Code: 22437

A Fabulous Quality King George IIIrd Cased Double Barrel Sporting Gun By World Renowned Gunsmith S.Nock, Early Transitional Flintlock To Percussion

Very fine sighted damascus barrels of the finest quality, engraved Saml. Nock 180 Fleet St. London Maker to His Majesty, case colour hardened gold lined breech engraved with a hound, border and foliate engraved, signed lock converted from flintlock using the drum and nipple principle, half stocked with chequered wrist, border and scroll engraved steel mounts, the trigger guard decorated with a hound, serial numbered to the underside of the barrels, contained in its green baize lined oak case, the lid with trade label for Samuel Nock at the Regent Circus address, complete with commensurate and later accessories.
Samuel Nock was the nephew of famed innovative gunmaker Henry Nock and apprenticed under him. He was also a highly rated and accomplished gunmaker and worked through the transitional period from flintlocks to percussion systems. He served as a royal gunmaker to the English monarchy from King George III in 1805 up to Queen Victoria starting in 1837. He died in 1851. To replicate such a fine hand made ‘bespoke’ double barrelled gun today, only Purdey or Boss of London could have the skills required to replicate it. A finely engraved, bespoke single Purdey side by side sporting gun, with a Damas barrels, costs today £113,500, with an 18 months to 2 year waiting time, and additional costs for casing and tools. The double-barrelled sporting gun was seen as a weapon of prestige and authority, especially in the days of the East India Company and the later Raj in India, where it was known as Dunali (literally "two pipes"). It was especially valued by the nobility in the Raj in Bihar, Purvanchal, Uttar Pradesh, Haryana and Punjab  read more

Code: 23371